Timers - How to Read

Click to View in: French German Spanish
Reading the Timer:
If you need to know the precise time remaining, you can tell how much time is left on the timer in one of 2 ways:

1) Each lit LED in the top array of 15 is equal to four minutes. Add the value from the 3 ‘neck” LEDs: The top LED is worth 3 minutes, the middle one is 2 minutes, and the bottom is 1 minute. Fig. 5 shows the pattern at 13 minutes [3 LEDs x 4 minutes + the bottom neck LED is 1 minute more.]

2) Follow the guide molded on the back of the timer (Fig. 6): Find the position of the highest value of the lit LEDs, and add the minutes described by the ‘neck” LEDs. In Fig. 5, the LEDs in the 4, 8, and 12 positions are lit, as is the "1" in the neck LEDs. Since 12 is the highest of the values, there are 12 + 1 = 13 minutes remaining.

Note that it displays “13” just up until the moment when the time decreases to 12 minutes.
Fig. 5
13 min.
Fig. 6
Guide
Copyright  © 2017 - Anelace Inc.

All rights reserved. Reproduction in whole or in part is strictly prohibited
without written authorization from Anelace Inc.